> UPS системи SOCOMEC > Монофазни SOCOMEC

Монофазни SOCOMEC

UPS MODULYS EM (3-6 kVA)

Centralised power supply systems are designed for buildings subject to fire safety regulations
They comply with EN 50171.
The CPSS are designed chiefly to supply emergency lighting in the event of a failure in the normal power supply, but can also be used to supply other emergency systems, for example:
• automatic fire extinguishing installations,
• emergency detection and warning units,
• smoke extraction equipment,
• carbon monoxide detection systems,
• specific safety installations in sensitive areas. 


COMPLIES WITH STANDARDS

The EMergency EM range has been developed in compliance with European standards. The product is defined as a "Central Supply System" running on AC current under 1000 V and employing batteries as a backup power source
Using a centralised power supply system

• reduces installation costs
• simplifies mandatory periodic test operations
• eliminates the drawbacks caused by thermal stress on back-up batteries located in high places
• reduces the cost of your investment
• reduces operational costs (long-term reliability).
Emergency : improved RELIABILITY

The battery is a vital part of Backup Power Supply systems.


ADVANTAGES


• centralised power source EN 50171
• on line double conversion technology (VFI-SS-111)
• precise voltage and frequency
• fully digital controls
• integrated batteries (up to 60 minutes)
• high capacity batteries with a 10 year life
• batteries tested automatically
• monitoring and control panel with alphanumeric display
• serial RS 232 interface
• serial RS 485 interface for 4.5 and 6 kVA models
• dry contacts interface.


OPERATING MODES

• changeover mode
• mode without interruption
• changeover mode with additional control switching device for central and partial switching of the load (on request)
• non-maintained changeover mode

ACCESSORIES (on request)

• galvanic isolation transformer
• permanent isolation controller


NET VISION
SNMP - Web manager


MAIN CHARACTERISTICS
• T-SERVICE, remote diagnostics functions with automatic sending of report and alarms via e-mail to the local authorised Socomec UPS Service Centre
• SNMP /HTTP agent for easy control of remote stations
• JNC (Java&.NET TM Shutdown Client) optional.

ADVANTAGES
Easy connection to the network

To be able to monitor and interact with the UPS from any PC equipped with an Internet Browser, just make a connection with NET VISION between the UPS and your company´s network. The UPS can then be managed like any other network peripheral.

Ergonomic user interface: Web Browser

The graphic menu interface has been designed to make the use of NET VISION "user-friendly". With a simple click of the mouse the user can obtain information on the operating status, configuration, history log and back up time of his UPS

Monitoring via JAVA™ applet

NET VISION provides a JAVA applet to show the status of the UPS through dynamic graphics.

This applet can display the most important UPS parameters and measurements in "real time.

Independent from operating systems

The information of a UPS equipped with  NET VISION can be accessed from any Workstation or Server, all independently from the Operating System being used.

Remote management: SNMP - HTML - Telnet

This important feature ensures optimal compatibility with all operating platforms, thanks to the use of SNMP, the widespread communication protocol. For ease of consultation and programming, NET VISION uses a common HTML interface that can be displayed with any last generation web browser. An IP address can thus be assigned to the UPS so that it can also be managed remotely.

BASIC PRINCIPLE

NET VISION processes the information from the UPS and makes it available by means of standard computer network protocols (SNMP, HTTP, etc.). This information from the UPS available via the network allows the network administrator to take the necessary measures on verifying any critical events. Moreover, in the case of special events, automatic procedures such as the automatic shutdown of the PCs/servers connected in the network can be activated.


RANGE AND DIMENSIONS

model

input/output

kVA

 kW

dimensions (WxDxH) mm

weight (kg)

 MOD EM 130

1/1

3

2.1

 444x795x1000

 240

MOD EM 145

1/1

4.5

3.15

 444x795x1000

 330

MOD EM 160

1/1

6

4.2

444x795x1000

 340

 

TECHNICAL DATA

Rectifier input

Voltage

single-phase 230 V (1ph+N) ± 20 %

Permissible tolerance

up to -30 % at 70% nominal load

Frequency

50 - 60 Hz ± 10 %

Absorbed current

THDI < 5 %

Power factor upstream

> 0.98

 

Output

Voltage

single-phase 230 V

Tolerance under static conditions

± 3 %

Frequency (configurable)

50 - 60 Hz

Frequency tolerance

± 0.1 %

Admissible crest factor without de-rating

3:1

Overload

130 %

 

Environment

IP rating (IEC 60529)

IP 20

Noise level  (ISO3746)

< 52 dBA at 1 metre

Compliant with:

 

Centralised power supply system

EN 50171

Reference standards

EN / IEC 62040-1 safety

EN 50091-2 EMC

IEC 62040-3 performance

Classification (IEC62040-3) :

UPS VFI* - SS - 111

* Voltage Fequency Independent

             





Разгледай цялото продуктово направление »


Може да Ви интересуват и


KОМУНИКАЦИИ И СВЪРЗАНОСТ

СТАНИ ПАРТНЬОР НА

DTS