NET VISION

is a network adapter for the professional monitoring and remote control of a single and modular UPS or parallel UPS system. The NET VISION network adaptor allows a UPS to connect directly the Ethernet network allowing secure management of the UPS over the network using a web browser or NMS application via SNMP. The protocols used for connection are independent of the platform and operating system, therefore Net Vision is extremely flexible and suitable for all systems. In addition to monitoring and control, the NET VISION interface provides a high level of protection for standalone servers or hosts managing virtual machines powered by the UPS. In critical conditions, up to 250 devices powered by the UPS can be switched off in an orderly sequence whilst ensuring data integrity. The remote shutdown is provided by a client shutdown to be installed on all standalone servers (JNC) or on a virtual machine (VIRTUAL-JNC) that require this automatic function. JNC and VIRTUAL-JNC are shutdown agent software available for free on SOCOMEC’s web site or on the NET VISION CD.3.2.

SOCOMEC UPS COMPATIBILITY

Net Vision is compatible with the following SOCOMEC UPS products:
• NETYS PR
• NETYS RT
• ITYS
• ITYS-PRO
• MODULYS
• MODULYS GP 2.0
• MASTERYS BC. IP+. EM and GP
• MASTERYS BC+ / GP4
• DELPHYS MP / MX
• DELPHYS BC. GP and Xtend
• And all new SOCOMEC UPS with standard COM-Slot.

NET VISION 7 FEATURES

UPS FUNCTIONS
• Real-time UPS health monitoring
• Comprehensive UPS management and flexible configuration via Web Browser
• Automatic detection of UPS architecture: single, modular, or parallel system.
• Battery test management (if supported by UPS)
• UPS controls (If enabled by UPS)
• UPS date and time synchronisation (if enabled by UPS)
• Automatic UPS events notification via E-mail and SNMP Trap
• Complete shutdown procedure to protect up to 250 servers/workstations or HOSTS/VM from data loss due to power outage
• Scheduling shutdown/start-up/reboot of UPS via remote control (only for single phase UPS)
• Regularly records UPS parameters for statistical analysis and event diagnostics

net vision card

NETWORK SERVICES

• Assigned IP automatically via DHCP or BOOTP
• Standard RFC1628 UPS MIB and NET VISION proprietary MIB supported
• 10/100Mbps fast Ethernet auto-sense network environment
• Configuration utility simplifies the firmware upgrade process
• Radius users account support
• IPv4 and IPv6 dual-stake
• Supports MODBUS TCP protocol to connect monitoring equipment
• Digital output to support relay control device (EMD)
• Firewall network access control avoiding non-authorized IP access

NETWORK PROTOCOLS

• IPv4 / v6
• HTTP / HTTPs with certificate
• DHCP / BOOTP
• SNMP v1 / v2c / v3 (MD5-SHA / DES-AES)
• SMTP over TLS
• SSH
• UPnP
• NTP / ICMP
• WOL
• RADIUS
• TFTP
• SYSLOG